Ijoy RDTA Mini 100W Starter Kit


Product Features:

5 to 100W Output

0.05 to 3.0 ohm Minimum Atomizer Resistance

1 to 8V Output

1 to 30A Output

Four Setting Output Mode





Customized Working Waveband

Firmware Upgradeable

95% Power Efficiency

Temperature Control Suite

Ni200 Nickel Support

Titanium Support

Stainless Steel Support

Adjustable Initial Resistance

TCR Mode

Two Bank Memory

300 to 600 Degrees Fahrenheit Output Range

0.05 to 3.0 ohm Atomizer Resistance Range

0.96″ OLED Screen

Vertically Stacked Matrix

Output Wattage and Temperature

Output Voltage

Mode and Heating Element

Atomizer Resistance

Output Current

Battery Life Indicator

Rotating Screen

Atomizer Resistance

LED Light Set

Built In LiPo Battery

2500 mah

Micro USB Charging

1A Charge Rate

Integrated Combo RDTA Platform

RBM Interchangeable Build Deck System

RBM Deck

Two Post

Dual Terminal Per Post

2.5mm Diameter per Terminal

Side Mounted Phillips Screws

Dual Coil Compatible

Quad Wicking Ports

Sidewall Cutouts

RBM Coil 0.25 ohm

Prebuilt Sub-Ohm Coil

Ceramic Deck

30 to 60W

Organic Cotton Wicking

Full Range Tank Reservoir

6.0ml Tank Capacity

Top Fill Design

Dedicated Threaded Fill Port

10mm Diameter

Pour to Fill

Dual Adjustable Airflow

10mm by 2mm Each Airslot

10mm Wide Bore Drip Tip

Stainless Steel 510 Connector

Spring Loaded Brass 510 Pin

Able to Use as Standard 510

PCB Temp/Low Battery/Atomizer Short/Low Resistance Protection


A predecessor to the popular RDTA Box 200w, the RDTA Box Mini has improved tank seals and a built in 2600 mah LiPo battery packed into a housing that is a fraction of the size of the original. iJoy brings back the Paisley design on the 22mm cap of the RDTA Mini and features a dual adjustable 10mm by 2mm airflow system. The RDTA Box Mini utilizes RBM-C2 0.25 ohm coils which can be ran 30 to 60W and also includes a two post rebuildable deck. Both deck options are wicked downward into the reservoir and utilize the brass collar to hold the wicks in place. The reservoir can be filled from an independent 10mm fill hole which is accessed by removing the threaded fill plug and e-juice levels can be seen through the side viewing window. The versatility of the RDTA Box Mini continues with its ability to be ran as a standard box mod by removing the RBM Deck or Coil, emptying the tank reservoir, and using the RBM connection as a standard 510 connection. The RDTA Box Mini features a new IWEPAL powered chipset capable of 5 to 100W of output across four output modes, full temperature control support, and a vibrant, vertically stacked 0.96 inch OLED screen. This device also has an on board micro USB for both 1.0A charging and firmware upgrade. Unrivaled in capacity and versatility while packing in a 95% Power Efficient IWEPAL chipset capable of up to 100W.


There are no reviews yet.

Be the first to review “Ijoy RDTA Mini 100W Starter Kit”

Your email address will not be published. Required fields are marked *